|
|
Destroyer Major Pumper
 |
Chassis:
Mercedes Benz 1528 (4x2)
GVM 15000 kg
Engine
Mercedes Benz OM906LA
205 kW @ 2200RPM
1100 Nm @ 1200 rpm
Transmission
Allison Automatic
Optional:
retarder
5 Pag
Not Optional:
Axle ratio - 3,917:1
Steering - LS 6 power steering
Brakes
Front discs
Rear discs
Dual circuit air brakes
ABS/ALB
Tyres
11R22.5
Rims
Drop centre 7.50x22.5
Battery
2x12V/115 Ah
Complies - Road Traffic Act of 1989
Crew Cab Extension:
Manufactured by Plastisol.
Complies fully with NEN 1846 and ECE 29
Safety Regulations.
Manufactured from GRP.
Seating for driver, officer and four crew
with facility for storing BA's in seats.
Body:
All aluminium large dimension extrusions with
5mm wall thickness & interlock grooves for 3mm
aluminium plate.
Under-body cross members shall be constructed
entirely from a 76mm x 76mm aluminium ''I''
beam and heavy walled extrusions and shall be
full width of the body.
The body shall have a body side protection rub
rail along the length of the body on each side and
at the rear.
Six (6) large enclosed and vented equipment
compartments with lockable roller shutter doors.
Auxiliary access ladder for access to hose bed.
The rear body shall have a cut away to enhance
angle of departure.
Hose bed:
The hose bed compartment shall be free of
sharp edges and projections to prevent damage
to hose. The hose bed shall be completely
removable for easy access to the water / foam
tanks. The deck design shall incorporate a
a provision for the installation of adjustable hose
bed dividers.
The hose bed shall be fitted with one (1) hose bed
divider.
Water Tank:
3000 litre capacity constructed from 12mm thick
polypropylene material.
Foam Tank:
150 litre capacity cell as part of the water tank
with separate fill /vent / overflow tower.
Pump System:
Godiva WTA 4010 multi pressure
Rear mount
Maximum flow LP 6200 l/min
HP 750 l/min
Maximum outlet pressure HP 55 bar
Maximum outlet pressure LP 16 bar
Thermal relief valve activation 42ºC
Stainless steel plumbing.
Electric vane type primer.
Four (4) 65mm instantaneous discharges.
Two (2) 25mm hose reel discharges.
Auxiliary engine cooler.
Pump Panel:
Operator's controls and gauges shall be mounted
on a stainless steel pump panel positioned above
the pump.
Foam System:
Williams WATP#500 ATP system for Class A
application. Adjustable from 0.25 - 1%.
Hose Reels
Two (2) manuals rewind hose reels with 30m x
25mm high pressure hose and TFT nozzles.
Warning Lights:
One (1) Federal Signal Aerodynic model
ADL5202 roof light bar with red and clear lenses.
One (1) Federal model MS-100-01 Dynamax 100
watt speaker.
One (1) Federal Signal model PA300-200MSC
solid state electronic siren with attached noisecancelling
PA microphone.
One (1) Alternating headlight flashing system.
Two (2) red Federal Signal rear rotating lights.
One (1) Federal strobe package in accordance
with NFPA Standards.
Standard Equipment, Supplied and Fitted:
1 x Beam gantry for ladder removal
1 x 10.67m three section extension ladder
1 x Three-way collecting head
2 x 3m x 152mm hard suction hose
2 x Hard suction hose mount racks
1 x Chrome barrel strainer
1 x Galvanized basket strainer
1 x Spare wheel (loose)
1 x 20T hydraulic jack & wheel spanner
1 x Locking fuel cap with 3 keys
2 x Operator, service, and parts manuals
Options Available:
Pneumatic lightmast system
5 kVa generator
Piston primer IPO electric vane
Electric winch
14m (464) ladder IPO 10,2m
Centre mount beam gantry IPO side mount
Class B foam system
Large diameter discharge(s)
BA cylinder storage in wheel wells
Cross-lays IPO Hose Reel(s)
Pan type doors IPO roller shutters
PAC equipment mounting
Adjustable compartment shelves
|
|
|
|
