Pierce

Oshkosh

Bronto Skylift

Plastisol

Local Manufacture Program

Refurbishments

Fire Fighting Foam

African Wildfire Equipment

Fire, Rescue, HazMat & Disaster Management Equipment

Pumps

Fire & Rescue Boats

Class 1

Vehicle Maintenance

Training and Response

Jimmi Jak

Rural Metro

Strategic Alliance Partners


Terminator Tanker Pumper

Chassis:
Nissan UD290WF (4x2)
GVM 26000 kg

Engine
Nissan Diesel PF6T
213 kW @ 2100RPM
1196 Nm @ 1200 rpm
Transmission Allison Automatic

Optional:
retarder
Differential lock
Axle ratio – Tandem
Steering – Power steering
Brakes Front drums
Rear drums
Dual circuit air brakes
Emergency spring brake
Tyres – 12R22.5
Rims – Drop centre 9.00x22.5-175
Battery – 2x12V/118 Ah
Complies – Road Traffic Act of 1989
Cab:
A590 steel/composite forward control, tilt.
Seating for driver, officer and one crew.

Body:
All aluminium large dimension extrusions with
5mm wall thickness & interlock grooves for 3mm
aluminium plate.
The body shall have a body side protection rub
rail along the length of the body on each side and
at the rear.
Three (3) enclosed and vented equipment
compartments with lockable pan doors.
Chrome D Ring slam locks shall be provided on
all compartment doors.
Two (2) hose trays for flaking supply and
attack lines shall be provided.
Auxiliary access steps for access to tank top.
The rear body shall have a cut away to enhance
angle of departure.

Water Tank:
9000 litre capacity constructed from stainless
steel.
Water tank shall be fitted with manhole cover to
allow easy access to the tank.
Baffles shall be longitudinal and vertical.
Water can be used for human consumption.

Foam Tank:
250 litre capacity
with separate fill /vent / overflow tower.

Pump System:
Hale MG100.
Midship mount.
Maximum flow LP 3800 l/min
HP 750 l/min
Maximum outlet pressure HP 24 bar
Stainless steel plumbing.
Electric vane type primer.
Four (4) 65mm instantaneous discharges.
Two (2) 25mm hose reels outlets.
Auxiliary engine cooler.

 

 

 

 


Pump Panel:
Operator’s controls and gauges shall be mounted on a stainless steel pump panel positioned on the left side.

Foam System:
Williams WATP#500 ATP system for Class A
application. Adjustable from 0.25 – 1%.
Hose Reels
Two (2) manuals rewind hose reels with 30m x
25mm high pressure hose and TFT nozzles.


Warning Lights:
One (1) Federal Signal Aerodynic model
ADL5202 roof light bar with red and clear lenses.
One (1) Federal model MS-100-01 Dynamax 100
watt speaker.
One (1) Federal Signal model PA300-200MSC
solid state electronic siren with attached noise- cancelling PA microphone.
One (1) Alternating headlight flashing system.
Two (2) red Federal Signal rear rotating lights.
One (1) Federal strobe package in accordance
with NFPA Standards.
Standard Equipment, Supplied and Fitted:
1 x Zico rear mount dump valve
1 x 10,000 litre portable tank
1 x Portable tank holder
1 x Three-way collecting head
2 x 3m x 152mm hard suction hose.
2 x Hard suction hose mount racks
1 x Chrome barrel strainer
1 x Galvanized basket strainer
1 x Spare wheel (loose)
1 x Hydraulic jack & wheel spanner
1 x Locking fuel cap with 3 keys
2 x Operator, service, and parts manuals

Options Available:
  • Pneumatic lightmast system
  • 5 kVa generator
  • Portable pump
  • Electric winch
  • Heavy duty brush guard, stainless steel
  • Foam injection system IPO Around the Pump
  • Additional hose trays
  • Class B foam system
  • Large diameter discharge(s)
  • Midmounted portable pump
  • Cross-lays IPO Hose Reel(s)
  • PAC equipment mounting
  • Full compliment of fire fighting rescue
          equipment
  • Mercedes Benz 3340 IPO Nissan UD290
  • Electric rewind hose reels IPO of manual
  • Deck gun, manually operated, 3800 l/min
  • Remote controlled deck gun IPO manual
  • Strip illumination for compartments
  • Signwriting and lettering
  • S stripe in 100mm reflective or painted