|
Chassis:
Mercedes Benz 1328 AF (4x4)
GVM 13500 kg
Engine Mercedes Benz OM906LA
205 kW @ 2200RPM
1100 Nm @ 1200 rpm
Transmission Allison Automatic
Optional: retarder
Transfer box – VG 900-3 W/1,691
Axle ratio – 5.222
Steering – LS 8 power steering
Brakes Front drums
Rear drums
Dual circuit air brakes
ABS
Tyres
10R22.5
Rims
Steel rims 7.50x22.5
Battery
2x12V/115 Ah
Complies –Road Traffic Act of 1989
Crew Cab Extension:
Manufactured by Plastisol.
Complies fully with NEN 1846 and ECE 29
safety Regulations.
Manufactured from GRP.
Seating for driver, officer and four crew
with facility for storing BA’s in seats.
Body:
All aluminium large dimension extrusions with
5mm wall thickness & interlock grooves for 3mm
aluminium plate.
Under-body cross members shall be constructed
entirely from a 76mm x 76mm aluminium ''I''
beam and heavy walled extrusions and shall be
full width of the body.
The body shall have a body side protection rub
rail along the length of the body on each side and
at the rear.
Six (6) large enclosed and vented equipment
compartments with lockable roller shutter doors.
Auxiliary access ladder for access to hose bed.
The rear body shall have a cut away to enhance
angle of departure.
Hose bed:
The hose bed compartment shall be free of
sharp edges and projections to prevent damage
to hose. The hose bed shall be completely
removable for easy access to the water / foam
tanks. The deck design shall incorporate a
a provision for the installation of adjustable hose
bed dividers.The hose bed shall be fitted with one (1) hose bed divider.
Water Tank:
3000 litre capacity constructed from 12mm thick
polypropylene material.
Foam Tank:(optional)
150 litre capacity tank as part of the water tank
with separate fill /vent / overflow tower.
Pump System:
Godiva WTA 3010 multi pressure.
Rear mount.
Maximum flow LP 4200 l/min
HP 750 l/min
Maximum outlet pressure HP 55 bar
|
Maximum outlet pressure LP 16 bar
Thermal relief valve activation 42ºC
Stainless steel plumbing.
Electric vane type primer.
Three (3) 65mm instantaneous discharges.
Two (2) 25mm hose reel discharges.
Auxiliary engine cooler.
Pump Panel:
Operator’s controls and gauges shall be mounted
on a stainless steel pump panel positioned above
the pump.
Foam System: (optional)
Williams WATP#500 ATP system for Class A
application. Adjustable from 0.25 – 1%.
Hose Reels
Two (2) manuals rewind hose reels with 30m x
25mm high pressure hose and TFT nozzles.
Warning Lights:
One (1) Federal Signal Aerodynic model
ADL5202 roof light bar with red and clear lenses.
One (1) Federal model MS-100-01 Dynamax 100
watt speaker.
One (1) Federal Signal model PA300-200MSC
solid state electronic siren with attached noise- cancelling PA microphone.
One (1) Alternating headlight flashing system.
Two (2) red Federal Signal rear rotating lights.
One (1) Federal strobe package in accordance
with NFPA Standards.
Standard Equipment, Supplied and Fitted:
1 x Beam gantry for ladder removal
1 x 7,2m three section extension ladder
1 x Three-way collecting head
2 x 3m x 152mm hard suction hose
2 x Hard suction hose mount racks
1 x Chrome barrel strainer
1 x Galvanized basket strainer
1 x Spare wheel (loose)
1 x 20T hydraulic jack & wheel spanner
1 x Locking fuel cap with 3 keys
2 x Operator, service, and parts manuals
Options Available:
* Pneumatic lightmast system
* 5 kVa generator
* Piston primer in place of electric vane
* Electric winch
* Heavy duty brush guard
* Ground sweep nozzles
* Class B foam system
* Large diameter discharge(s)
* BA cylinder storage in wheel wells
* Cross-lays IPO Hose Reel(s)
* Pan type doors IPO roller shutters
* PAC equipment mounting
* Adjustable compartment shelves
* Pull out trays
* Full compliment of fire fighting & rescue
equipment
* Central locking system for roller shutter doors
* Electric rewind hose reels IPO of manual
* Deck gun, manually operated, 3800 l/min
* Remote controlled deck gun IPO manual
* Multiple hose bed dividers
* Strip illumination for compartments
* Signwriting and lettering
* S stripe in 100mm reflective or painted |
